OpenVVVF/docs
OPENVVVF
Integration Manual

Integration Guide

Installation, integration, and operating guide for the Chassis Size 2 power-stage family. Under revision.

Document IDOV-C2-IG-INDEX
Version0.2
Date2026-08-08
Statusdraft
Applies tochassis-size-2
Product lineopenvvvf
Normative referencesOV-SAF-HARA-CORE, OV-SAF-HARA-PROF-MOTO
Index / Hardware / Power Stages / Chassis Size 2 / Integration Guide / Integration Guide
OV-C2-IG-INDEX · v0.2 · draft · 2026-08-08
DoctypeIntegration Manual
Doc idOV-C2-IG-INDEX
Product lineopenvvvf
Applies tochassis-size-2
Version0.2
Date2026-08-08
Statusdraft
PlaceholderTrue
DescriptionInstallation, integration, and operating guide for the Chassis Size 2 power-stage family. Under revision.
Nav order221
Normative refsOV-SAF-HARA-CORE, OV-SAF-HARA-PROF-MOTO
Placeholder / Under Revision - This page is incomplete or out of date and will be revised.

Integration Guide

Note
This guide is under revision. The previous version contained a large amount of control-module content that is shared across all chassis sizes and belongs in the OV-CA-UHW-INDEX Control Assembly User Hardware Manual. It also presented specific capacitor and current ratings that do not apply to all C2 variants.

The C2 chassis family is designed to support a range of DC-link capacitor voltages (200 V class through 450 V class) and continuous current ratings. Specific BOMs, ratings, and variant-specific instructions will be documented here once the platform-vs-chassis split is finalized.

For now, refer to the assembly guide, design documents, and HARA / TARA for safety-relevant information.

Planned content

  • Mechanical installation and mounting
  • HV and LV electrical interface
  • Thermal management and heatsink requirements
  • CAN integration and reference frame definitions
  • Precharge and safe-state behavior
  • Troubleshooting