OV-CA-SWM-INDEX · v0.1 · draft · 2026-08-08
DoctypeSoftware Manual
Doc idOV-CA-SWM-INDEX
Product lineopenvvvf
Applies toopenvvvf-control-module, software-target-main-mcu, software-target-safety-coprocessor
Version0.1
Date2026-08-08
Statusdraft
PlaceholderTrue
DescriptionBase firmware image, RTE Studio setup, flashing procedures, and custom software development for the control module.
Nav order120
Normative refsOV-SW-MAINMCU-INDEX, OV-SW-MAINMCU-ARCH, OV-SW-MAINMCU-BOOT, OV-SW-COPROC-INDEX, OV-SW-COPROC-ARCH, OV-SW-RTE-INDEX, OV-SW-RTE-INTERFACE
Placeholder / Under Revision - This page is incomplete or out of date and will be revised.

Software Manual

This manual describes the software side of the OpenVVVF control module.

Placeholder - This manual is being rewritten. The previous Software Architecture Document mixed user, developer, and safety-coprocessor material; it is being split into the documents below.

Planned sections

  1. Base firmware image overview
  2. Flashing and recovery procedures
  3. RTE Studio setup and configuration
  4. Building and loading custom application code
  5. Firmware updates and rollback
  6. Safety-coprocessor interaction
  7. Troubleshooting
  • OV-SW-MAINMCU-INDEX - Main MCU Software
  • OV-SW-MAINMCU-ARCH - Architecture
  • OV-SW-MAINMCU-BOOT - Bootloader
  • OV-SW-COPROC-INDEX - Safety Coprocessor Software
  • OV-SW-COPROC-ARCH - Architecture
  • OV-SW-RTE-INDEX - RTE Studio Software
  • OV-SW-RTE-INTERFACE - Interface